Volume 2, Issue 4-1, December 2016, Page: 18-24
Behavior of Tubular Hat Structure Under Three Point Bending
Le Duy Hien, Department of Aerospace Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh City, Viet Nam
Ly Hung Anh, Department of Aerospace Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh City, Viet Nam
Received: Aug. 12, 2016;       Accepted: Oct. 9, 2016;       Published: Nov. 22, 2016
DOI: 10.11648/j.ijtet.s.2016020501.14      View  2881      Downloads  69
Abstract
The paper focuses on the energy absorption capacity of structural materials, the most important in frame design, the structure of the vehicles, scaffolding. Main content include new solution with comparing the general structure cylinder, square tube, top-hat and reverse top-hat. After that, considering and comparing displacement, force in the transformation process and find out the rule of energy that be also the core value of research, a new method to observe these processes.
Keywords
Top-Hat, Mean Force, Behavior of Structure
To cite this article
Le Duy Hien, Ly Hung Anh, Behavior of Tubular Hat Structure Under Three Point Bending, International Journal of Transportation Engineering and Technology. Special Issue: Experiments Researches in Aeronautical Engineering. Vol. 2, No. 4-1, 2016, pp. 18-24. doi: 10.11648/j.ijtet.s.2016020501.14
Copyright
Copyright © 2016 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Kecman, D. Bending collapse of rectangular and square section tubes. International Journal of Mechanical Sciences, 1983, 25.9: 623-636.
[2]
Duarte, I.; Vesenjak, M.; Krstulović-Opara, L. Dynamic and quasi-static bending behaviour of thin-walled aluminium tubes filled with aluminium foam. Composite structures, 2014, 109: 48-56.
[3]
Duarte, I.; Krstulović-Opara, L.; Vesenjak, M. Characterisation of aluminium alloy tubes filled with aluminium alloy integral-skin foam under axial compressive loads. Composite Structures, 2015, 121: 154-162.
[4]
Liu, Y.; Day, M. Bending collapse of thin-walled beams with channel cross-section. International Journal of Crashworthiness, 2006, 11: pp. 251-261。
[5]
L. Phi, Behavior of thin-walled cylindrical tube subjected to bending. Graduation Thesis in Ho Chi Minh city, Viet Nam. 2014.
[6]
L. H. Anh. Behavior of thin-walled pragmatic structures subjected to low velocity impact loading. M.A Thesis, Institut Teknologi Bandung. Indonesia, 2007.
[7]
Santosa, S.; Banhart, J.; Wierzbicki, T. Bending crush behavior of foam-filled sections. Metal foams and porous metal structures, Verlag-MIT, Bremen, 1999, 337-345.
[8]
Santosa, S.; Banhart, J.; Wierzbicki, T. Bending crush behavior of foam-filled sections. Strain, 15.20: 25.
[9]
Zhou, P., et al. Experimental comparison of energy absorption characteristics of polyurethane foam-filled magnesium and steel beams in bending. International Journal of Impact Engineering, 2016, 93: 76-87.
[10]
LS_DYNA keyword user’s manual. Livermore Software Technology Corporation.
[11]
Kamaya, Masayuki. Stress–strain curve estimation procedures for stainless steels based on yield and ultimate strengths. Engineering Fracture Mechanics, 2014, 127: 194-210.
Browse journals by subject