Volume 5, Issue 3, September 2019, Page: 43-49
Ship Hull Form Optimization: A Computational Fluid Dynamics (CFD) Approach
Donatus Eberechukwu Onwuegbuchunam, Department of Maritime Management Technology, Federal University of Technology, Owerri, Nigeria
Favour Chimobi Ogbenna, Department of Maritime Management Technology, Federal University of Technology, Owerri, Nigeria
Nnaemeka Charles Ezeanya, Department of Agricultural & Bio-Resources Engineering, Federal University of Technology, Owerri, Nigeria
Kenneth Okechukwu Okeke, Department of Maritime Management Technology, Federal University of Technology, Owerri, Nigeria
Received: Jun. 17, 2019;       Accepted: Aug. 14, 2019;       Published: Oct. 15, 2019
DOI: 10.11648/j.ijtet.20190503.11      View  35      Downloads  12
Abstract
Performance of ship resistance and other propulsion characteristics greatly depend on ships’ hull form. However, design considerations based on range of hull modifications can be practically limited by material and time resources, hence the need for computational optimization techniques based on Computational Fluid Dynamics (CFD). In this paper, hull form of a parent vessel: single screw supply vessel was screen designed and then sequentially optimized for total resistance and wave height through the application of CFD technique. The modelling was done using ANSYS®, CAESES® and NAVCAD® workbench. Input parameters included moulded beam, steepness of stem and length overall. These were the basis for parametric variations of hull forms during optimization. The optimization processes (based on turbulent flows) lasted for about two hours. A model of the optimized hull was built and tested in marine towing tank with appendages including propeller and rudder at respective model speeds in standard conditions. Towing tests showed that the optimized ship hull exhibited low resistance and decreased wave height in comparison with parent hull. The robustness of CFD technique particularly for stern to stem hull modification was further established.
Keywords
Hull Form Optimization, Computational Fluid Dynamics, Total Resistance, Wave Height, Navier Stokes Equation
To cite this article
Donatus Eberechukwu Onwuegbuchunam, Favour Chimobi Ogbenna, Nnaemeka Charles Ezeanya, Kenneth Okechukwu Okeke, Ship Hull Form Optimization: A Computational Fluid Dynamics (CFD) Approach, International Journal of Transportation Engineering and Technology. Vol. 5, No. 3, 2019, pp. 43-49. doi: 10.11648/j.ijtet.20190503.11
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Wendt, J. F (2009), Computational Fluid Dynamics: An introduction. Springer-Verlag Berlin Heidelberg, Germany.
[2]
Szelangiewicz, T & Abramowski, T. (2009) Numerical analysis of influence of ship hull form modification on ship resistance and propulsion characteristics. Polish Maritime Research 4 (62) Vol. 16; Pp. 3-8.
[3]
Zhang, S, Zhang, B, Tezdogan, T, Xu L & Lai, Y (2018) Computational fluid dynamics-based hull form optimization using approximation method, Engineering Applications of Computational Fluid Mechanics, 12: 1, 74-88, DOI: 10.1080/19942060.2017.1343751.
[4]
Zonga, Z, Hong, Z, Wang, Y, & Hefazi, H (2018), Hull form optimization of trimaran using self-blending method, Applied Ocean Research, Vol. 80, 240-247.
[5]
Aksenov, A. A, Pechenyuk, A. V & Vučinić, D (2015). Ship hull form design and optimization based on CFD. Towards Green Marine Technology and Transport – Guedes Soares, Dejhalla & Pavleti (Eds) © 2015 Taylor & Francis Group, London, ISBN 978-1-138-02887-6.
[6]
Park, J. H, Choi, J. & Chun, H. (2015) Hull-form optimization of KSUEZMAX to enhance resistance performance. International Journal of Naval Architecture & Ocean Engineering, Vol. 7, 100-114.
[7]
Pérez, F, Clemente, J. A. (2011), Constrained design of simple ship hulls with B-spline surfaces Computer-Aided Design 43, 1829-1840.
[8]
Kostasa, K. V, Ginnisb, A. I, Politisa, C. G & Kaklisc, P. D (2015), Ship-hull shape optimization with a T-spline based BEM–isogeometric solver Comput. Methods Appl. Mech. Engrg. 284, 611-622.
[9]
Sar-oz, E (2009) Inverse design of ship hull forms for seakeeping. Ocean Engineering 36, 1386-1395.
[10]
Vernengo, G.; Brizzolara, S.; Bruzzone, D. (2015), Resistance and seakeeping optimization of a fast multihull passenger ferry. Int. J. Offshore Polar Eng. 25, 26-34.
[11]
Luo, W & Lan, L (2017), Design Optimization of the Lines of the Bulbous Bow of a Hull Based on Parametric Modeling and Computational Fluid Dynamics Calculation Mathematical and Computer Application, 22, 4; doi: 10.3390/mca22010004.
[12]
Wen, A. S.; Mariyam, S.; Shamsuddin, H. & Samian, Y. (2006), Optimized NURBS ship hull fitting using simulated annealing. In Proceedings of the International Conference on Computer Graphics, Imaging and Visualisation, Sydney, Australia, 26-28 July 2006; pp. 484–489.
[13]
Brizzolara, S.; Vernengo, G.; Pasquinucci, C. A.; Harries, S. (2015), Significance of parametric hull form definition on hydrodynamic performance optimization. In Proceedings of the MARINE 2015-Computational Methods in Marine Engineering VI, Rome, Italy, 15-17; pp. 254-265.
[14]
Ang, J.; Goh, C.; Li, Y. (2015), Hull form design optimization for improved efficiency and hydrodynamic performance of “ship-shaped” offshore vessels. In Proceedings of the International Conference on Computer Applications in Shipbuilding, Bremen, Germany, 29 September-1 October 2015; pp. 1-10.
[15]
Wang, J. A (2015), NURBS-Based Computational Tool for Hydrodynamic Optimization of Ship Hull Forms. Ph. D. Thesis, George Mason University, Fairfax, VA, USA.
Browse journals by subject